د.سالم ابوبكر سلطان2026-11-162026-11-16https://dspace.academy.edu.ly/handle/123456789/2797Steel is a metal alloy created from a mixture of iron and carbon. Iron is a key component in steel and carbon content in the steel which varies between below than 0.2% until above 0.5% mass depending on the grade of steel. Metal alloys are also commonly known as cast iron because of the carbon content in which it affects the low melting point and easy to be poured into molds . Steel is commonly used in building construction, infrastructure such as bridge, tools equipment, machinery, ship, vehicle components and weapon This is because the mechanical properties of ductile steel which is easy to set up and cost-effective, high work hardening rate, high yield strength resistance to impact loading, and has a very goods surface. Researchers have done a deeper study for steel material about the grain refinement which to increase the yield strength for steels and the toughness simultaneously.The main purpose of this study is to improve the welding process for the traverse of the truck, where is the welding operation in the company dependent greatly on the skill of the operator , in this study , the welding parameter which have direct influence on the welding quality where taken in to account to obtained the best results from this study and this well be a reference for the company of traverse welding . A MIG welding process was implemented as it have been used in ( Tagura Company for Trucks) .Samples for testing were papered from the metal which the traverse made off .Carbon steel thickness of ( 7mm )and the welding gas which was mixed of argon and CO2. Argon ( 80%) and co2 (20%) .The welding parameters were ,volt .ampere and speed and the other parameters where fixed .The effect of mig welding parametersThe effect of mig welding parameters on plate made from mild steel