مشروع البحث: CORROSION OF STEEL MEMBERS STRENGTHENENED WITH CARBON FIBER REINFORCED POLYMER SHEETS
| dc.contributor.advisor | جامعة كولورادو | |
| dc.date.accessioned | 2024-12-25T10:57:16Z | |
| dc.date.available | 2024-12-25T10:57:16Z | |
| dc.description | specimens per category for Beam section specimens. In addition one beam section specimen is control. The degree of corrosion is measured. Fourier transform infrared (FTIR) reflectance spectroscopy has been used to monitor and confirm the proposed corrosion mechanisms on the surface of CFRP. In this study we are using FTIR-spectroscopic measurement systems in the mid infrared (MIR) wavelength region (4000 – 400) cm-1 to monitor characteristic spectral features. | |
| dc.description.abstract | ABSTRACT Due to many years of service at several cases of exposure at various environments there are many of steel bridges which are in need of rehabilitation. The infrastructure needs upgrading, repair or maintenance, and also strengthening, but by using an alternative as retrofits methods. The alternative retrofit method, which used fiber reinforced polymer (FRP) composite materials which their strength materials comes largely from the fiber such as carbon, glass, and aramid fiber. Of the most important materials used in the rehabilitation of infrastructure is a composite material newly developed in bonded externally carbon fiber and polymer (CFRP) sheets, which has achieved remarkable success in the rehabilitation and upgrading of structural members. This technique has many disadvantages one of them is galvanic corrosion. This study presents the effect of galvanic corrosion on the interfacial strength between carbon fiber reinforced polymer (CFRP) sheets and a steel substrate. A total of 35 double-lap joint specimens and 19 beams specimens are prepared and exposed to an aggressive service environment in conjunction with an electrical potential method accelerating corrosion damage. Six test categories are planned at a typical exposure interval of 12 hours, including five specimens per category for double-lap joint specimens. And six test categories are planned at a typical exposure interval of 12 hours, including three | |
| dc.identifier | 370 | |
| dc.identifier.uri | https://dspace.academy.edu.ly/handle/123456789/949 | |
| dc.subject | failure occurs to measure their residual capacity. A relationship between the level of galvanic corrosion and the failure characteristics of steel-composite interface is established. | |
| dc.title | CORROSION OF STEEL MEMBERS STRENGTHENENED WITH CARBON FIBER REINFORCED POLYMER SHEETS | |
| dspace.entity.type | Project | |
| project.endDate | 2014 | |
| project.funder.name | الهندسة المدنية | |
| project.investigator | IBRAHIM BUMADIAN | |
| project.startDate | 2013 |